Posted September 28, 2014 The latest generation front-motor front-wheel drive FF series chassis is the FF-04 EVO Chassis kit, which builds on the carbon fiber double-deck concept of the FF-03 EVO Chassis and takes it to a new level with a range of upgraded and newly-designed parts. The chassis offers superior cornering, and employs a double deck layout with 2.5mm thick lower and 2.0mm thick upper carbon fiber decks. Suspension arms use the same design as those on the TRF418 touring car chassis, and power is transmitted via an oil-filled gear differential unit housed in the XV-01 chassis design gearbox. The result is reduced track surface contact during cornering, and even sharper handling. Newly Designed parts include: - 2.5mm Thick Carbon Lower Deck - 3.0mm Thick Motor Plate L - Carbon Upper Deck - Carbon Bumper Support - Carbon F/R Damper Stays - Carbon Servo Plate - Aluminum Bulkhead - Aluminum Front Brace - Aluminum Servo Mount (compatible with low-profile servos) Featured Components: - Front Gear Differential Unit - Double Cardan Drive Shafts - Fluorine-Sealed Ball Bearings - TRF Dampers (Hard Black Coating) - Aluminum Turnbuckle Shafts - Hex Screws Translated Tamiya Japan text: FF-04 EVO Chassis Kit FF chassis lot of fans has evolved into the fourth generation in the cornering performance of the front-wheel drive unique. Use the carbon double deck Roy 2.5mm, Upper 2.0mm, adopted suspension arms of the same shape foot around the pure racer TRF418. Also, it is possible to reduce interference with the road surface and the corner of the chassis when entering by mounting the XV-01 gear box with built-in Giyadefu, we raised more turning performance. 1 / 10RC FF-04 EVO CHASSIS KIT (84394) ★ chassis configuration that stuck to the weight balance of the left and right. ★ Equipped with double cardan drive shaft and TRF damper. ★ The effective response to the centralization of mass, also low profile servo. Released November 22 http://kentech.blogs.se Share this post Link to post Share on other sites
