Posted March 15, 2015 ABC Hobby Gambado 1/10 FF HONDA CR-Z Grid M Chassis Touring Car Kit #25600 http://www.abchobby.com/productimg/gamb/pre.html http://www.abchobby.com/productimg/gamb/photo01.html http://www.abchobby.com/productimg/gamb/photo02.html http://www.abchobby.com/productimg/gamb/photo03.html http://www.abchobby.com/productimg/gamb/photo04.html http://www.abchobby.com/productimg/gamb/photo05.html http://www.abchobby.com/productimg/gamb/photo06.html http://www.abchobby.com/productimg/gamb/photo07.html http://www.abchobby.com/productimg/gamb/photo08.html ABC Hobby released information on their new Gambado called 1/10 scale electric 2WD on-road chassis. The FWD (front wheel drive) chassis features a plastic composite chassis plate to which the front and rear McPherson strut suspension attaches. The springs sit directly on top of the pivot ball wheel carriers with friction dampers attached to the lower wishbones. The front-mid mounted motor sits in-line with the chassis roll axis and drives the front tyres. The stick battery pack, steering servo and receiver/speed controller are located in the middle to rear part of the M-size chassis. The Gambado comes as kit without electronics and an unpainted Honda CR-Z bodyshell. Technical data: - Front wheel drive - Gear differential - Length: 285mm - Wheelbase: 208mm - 210mm - Width: 160mm - Ground clearance: 3mm - 8mm - Weight: 1050g without body Link: ABC Hobby Gambado with CR-Z body shell Vehicle Specification: Drive Train: Front Wheel Drive Suspension: King-pin Strut Differential: 4 Bevel Gears Chassis: Plastic Tub Damper: Friction Steering: Crank Type Overall Length: 285mm Width: 160mm Weight: 1050g Wheelbase: 208 - 210mm Ride Height: 3 - 8mm Caster: Adjustable Toe: Adjustable Camber: Adjustable Gear Ratio: 3.8:1 - 8.5:1 Include: ABC Hobby Gambado 1/10 FF M Chassis Touring Car Kit (1 Set) Clear Body (1 Set) Wheels & Tires Decals Instruction Require: 540 Motor ESC Radio Servo Battery & Charger Share this post Link to post Share on other sites